Secondary break. #1 works a dribble handoff with #2
while #4 (the trailer) sets a down screen for #3.
If there is no dribble handoff in secondary break, #4 can
set a down screen for #3. When #1 passes to #3, #5
sets a back screen for #1 to set up the UCLA cut.
The UCLA cut in secondary break can be made if #1 passes to
#4 as the trailer.
On all secondary break plays, #4 can pass the ball to the
wing. When this happens, #5 will set a flare screen
for #4.
Set play for a post-up. #2 sets a down screen for #5
who will catch the ball at the elbow. #5 then looks to
make a high/low entry pass to #2.
Baseline out of bounds play. #5 cuts to the outside of
#3 to look for a lay-up. Once #5 clears, #3 rolls to
the ball on the side opposite #5. #2 will cut from the
elbow to the ball-side corner.